(L-FEET NOT INCLUDED)
Minimize the vertical height of your array- to hide an array behind a parapet, for example. You can also optimize tilt angle on a pitched roof to maximize system performance. Tilt angle depends on leg length and the make and model of your PV modules. Use standard rail with tilt legs.In low profile arrays, tilt angles depend on leg length and module length. If ordering kits for use with Solar Mount rail kits, no other items are requires. If ordering for use with Pro-Pak rails, then L-feet must also be ordered.Each leg contains a square tube, a strut insert, and fasteners.Note that usable lengths are 2" less than stated because holes are drilled 1" from ends.Low profile solutions require the addition of two(2) L-foot for each leg.48" to 106"(Rail length per row) - 2(Tilt legs required per row)120" to 180"(Rail length per row) - 3(Tilt legs required per row)192" to 216"(Rail length per row) - 4(Tilt legs required per row)226" to 288"(Rail length per row) - 5(Tilt legs required per row)300" to 336"(Rail length per row) - 6(Tilt legs required per row)348" to 408"(Rail length per row) - 7(Tilt legs required per row)420" to 432"(Rail length per row) - 8(Tilt legs required per row)
